OIL FREE VANE VACUUM PUMPS

Limited weight and dimensions are possible by the monobloc industrial design type with the rotor directly assembled on the motor shaft. Mainly built with light-weight alloys, they can be fitted where there is limited space, provided there is good ventilation.

OIL LUBRICATED VANE VACUUM PUMPS

Compac size combined with low ultimate pressure (abs.) are the main features of this new series. An effective damping and recovery system integral in the oil box, eliminates oil vapours at the exhaust and keeps noise level very low.

OIL BATH VACUUM PUMPS

The models were specifically designed for refrigeration and conditioning applications. The double stage and the single stage constructions provide optimal final pressure. The monoblock design and the use of light alloys, this series of pumps has very limited overall dimensions and weight.

ROCKING PISTON PUMPS

These small rocking piston units are specifically designed for a very wide range of applications (dentistry, medical devices, hobbies and light industry). The design structure requires the installation of the pump in safe environments.

SIDE CHANNEL BLOWERS

The DVP side channel blowers are conceived to suck or to compress gas or non-explosive mixtures. The blowers are connected directly to a two poles (2800/330 rpm), three phase or single phase asynchronous TEFC, 50/60 Hz motor with an IP 54 grade protection according to the IEC 34.1. standards. Both horizontal and vertical axis mount is allowed in all models.